Want to Learn More About WiFi?
Click Here to Sign-up for our Advanced Workshop for Network and WiFi Businesses
Basic SNMPD Installation And Configuration
Jun 30, 2016
This guide will cover the basics of installing and configuring SNMPD with your LEDE/OpenWRT device.
SSH to your OpenWRT device
If you are using Windows then start PuTTY and click Session on the left side, select SSH from the options, and then enter in the IP Address of your OpenWRT box into the Host Name field.
Once you’ve done this just click on Open to start up the SSH connection.
If you are connecting via terminal, then just SSH to your OpenWRT device using the following command, where 192.168.1.1 is your OpenWRT device’s IP address.
Installing the required packages is pretty easy. For this example we are going to install mini-snmpd. Just run the following two commands:
opkg update opkg install mini-snmpd
Once the install has completed you will need to configure it to your needs.
To set it up to your needs, you will need to edit the config file. To do this, run the following command:
You should see a file that looks similar to the following:
config mini_snmpd option enabled 1 option ipv6 0 option community public option location '' option contact '' option disks '/tmp,/jffs' option interfaces 'wlan0,br-lan,eth0.1,eth0'
The options are the following:
- enabled: Whether SNMPD should be started
- ipv6: Enables support for ipv6
- community: Sets the SNMP community string
- location: Sets the location that will be reported
- contact: Sets the contact detail that will be reported
- disks: Sets the filesystems that will be output
- interfaces: Sets the interfaces that will be output
Make the changes you need and then save. Now just run the following commands to start SNMPD and enable it to start on reboot:
/etc/init.d/snmpd start /etc/init.d/snmpd enable
Cucumber Tony is a cloud based WiFi management platform for businesses. The firmware gives consumer-grade WiFi access points enterprise-like capabilities. Or you can utilise the captive portal solution with your existing infrastructure. Create a free account and check it here cucumberwifi.io
Come join CucumberSign Up
Sign-up for Cucumber Tony, it's free for unlimited access points :)